When you replace car tires, make sure you do so with better ones. This guide will help you choose the best tires for your vehicle when a replacement is needed.
The tire size can be located on the sidewall of the old tire. Before you replace car tires, you should take note of the tire and conduct some cost comparisons online. When studying the tire size, get to know what all the codes mean. P basically represents passenger tire, while LT represents light truck tire. The number after those letters represent how wide the tire is. The next number is the ratio of the width of the tire to the height of the sidewall. If you see an ”R” after those number, it just stands for radial tire. The last number represents the diameter of the wheel in inches.
The quality of treadwear is denoted in hundreds. This shows a good sign of how long the tread of the tire will endure. The higher the number, the longer your tire’s tread life. Whatever the present tire’s load range is, it’s usually OK to purchase a tire with the same load range. If the vehicle’s tires handle a lot of heavy loads, think about getting a higher load ranged tire. Finally, consider how old the new tires are when you replace car tires. All tires should have an industry standard code. You can locate the DOT code on the sidewall of the tire. The remaining 4 numbers on the code indicates when the tire was manufactured.
Tags: car, code, load, number, range, Replace, sidewall, size, tire, vehicle